Skip to main content
Marvell Technology logo

Staff Hardware Engineer, Optics

Marvell Technology
November 17, 2026
Full-time
On-site
Santa Clara, California, United States
$108,220 - $162,100 USD yearly
Test Engineering Jobs, Level - Senior

Job Title

Staff Hardware Engineer, Optics

Role Summary

The Cloud Platform Optics team designs high-speed optical modules and subsystems combining silicon photonics, analog front-ends, controller ASICs, DSPs, and embedded firmware. This role owns electrical design for an optical module or defined subsystem and drives it from schematic and prototype bring-up through validation and new product introduction (NPI).

May require eligibility to access export-controlled technology. Expected base pay range (USD): 108,220 - 162,100 per annum; role is eligible for bonus and equity programs.

Experience Level

Senior. Typical experience guidance from the posting: Bachelor's degree + 3–5 years relevant hardware engineering experience, or Master's/PhD + 2–3 years; equivalent professional experience in lieu of a degree is acceptable.

Responsibilities

Owner-level hands-on hardware design, bring-up, measurement, and transfer to manufacturing.

  • Translate platform requirements into schematics, component selections, and PCB layout constraints for power delivery, clocking, control interfaces, and high-speed signal paths.
  • Bring first silicon and boards from power-on to a working link: verify rails, sequencing, clocks, resets, and register access; set up bench and coordinate diagnostics with firmware and photonics engineers.
  • Define and run performance tests versus specification (rail ripple, module power, BER, link margin) across voltage, temperature, and operating conditions; document pass/fail limits and margin.
  • Reproduce intermittent failures, isolate root cause across hardware/firmware/optics, and verify fixes with before-and-after measurements on updated hardware or firmware.
  • Support pilot builds, correlate bench and production-test results, and hand off validated test procedures, debug guides, and design documentation to NPI and manufacturing teams.
  • Collaborate closely with DSP, photonics, and firmware teams to optimize link performance and power.

Requirements

Must-have technical skills and practical experience.

  • Hands-on ownership of at least one PCB or electrical subsystem through schematic capture or layout review, first power-on, and bench validation.
  • Experience with ECAD tools such as Cadence OrCAD, Allegro, or comparable tools for schematic capture and layout review.
  • Practical measurement experience: personally measured at least two board-level parameters (for example: rail ripple, power-sequencing timing, clock frequency/jitter, or current draw) using oscilloscopes, programmable supplies, multimeters, or logic analyzers.
  • Experience debugging board-level control interfaces (I2C, SPI, UART) using bus captures, register reads, or firmware logs to isolate faults.
  • At least one documented example of taking a hardware issue from symptom to verified fix, including bench setup, original measurement, corrective action, and measured result versus target.
  • Experience defining test limits, documenting test procedures, and supporting manufacturing handoff.

Preferred / nice-to-have:

  • Bring-up or validation experience with optical transceivers or high-speed hardware (serial lanes ≥25 Gb/s); experience with eye measurements, BER testing, or PAM4 at 100G/200G per lane.
  • Python or similar scripting for instrument control, register access, automated test and data collection; familiarity with CMIS or optical module management.
  • Experience applying signal and power integrity principles to PCB design, and debugging thermal or EMI/EMC issues.

Reasonable accommodation contact: TAOps@marvell.com.

Education Requirements

Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related technical field with 3–5 years relevant hardware engineering experience; or a Master's or PhD in a related field with 2–3 years relevant experience. Equivalent professional experience in lieu of a degree is explicitly accepted.


About the Company

Company: Marvell Technology

Headquarters: Santa Clara, California, United States

Marvell’s semiconductor solutions serve as essential building blocks of the data infrastructure connecting our world, driving innovation across enterprise, cloud, AI, and carrier architectures. The company focuses on creating transformative technology that shapes the future.

Marvell Technology logo

Date Posted: 2026-11-10